SILO WEIGHING SYSTEM

Load Cell For Silo Weighing System: Single Ended, Double Ended, T Compression Load Cell

Load cells for the silo weighing system using single ended shear beam load cells, double ended shear beam load cells and T compression load cells are added below in this article.

Single Ended Shear Beam Load Cell

Load cells for silo weighing system using single ended shear beam load cells are added here. The load cell should be mounted on a flat, smooth surface with high-strength reinforced bolts.

The single-ended shear beam load cell is suited for medium-capacity weighing applications, such as hoppers and tanks, that demand precise measurement. They are also suitable for conveyor weighing applications. The single-ended shear beam load cell’s high integrity IP67 enclosure and alloy steel construction make it suitable for general-purpose industrial weighing applications where cost is an important consideration.

Double Ended Shear Beam Load Cell

A type of load cell called a double ended shear beam load cell measures the shear strain that results from applying a load to the middle of the device, which is supported on both ends. Although they can be employed in other industrial applications, they are frequently utilized in truck scales, tanks, and hoppers.

Force sensing: A spring element that is elastically deformed under load and recovers when the force is released is detected using strain gauges. An electrical signal is subsequently created from this deformation.

Shear measurement: To lessen the impact of transverse forces, shear is measured at two sites close to the neutral line of the load cell.

Uneven loading: Double ended shear beam load cells are less susceptible to uneven loading because of the force applied to the center of the device.

Calibration: They are able to measure tons, kilos, or grams with accuracy.

Low profile: Low profile areas are suitable for their installation.

Environmental tolerance: A few types are capable of withstanding corrosive, moist conditions as well as non-axial loads.

T Compression Load Cell

Load cells for the silo weighing system using T compression load cells are added here. High capacity compression load cells are renowned for their quality and dependability. Our sensors, also known as canister load cells, are perfect for high-accuracy applications in truck and railway scales, tank and silo weighing, and heavy-duty industrial scales that require load cell compression measurement techniques.

Applications of Single Ended Shear Beam Load Cells

Strain gauge-based load cells known as single-ended shear beam load cells have several uses, such as:

  • Weighing instruments include barrel scales, floor scales, hopper scales, tank scales, and low-to-medium capacity vessel scales.
  • Testing: Product and tensile testing to assess how well a product withstands force over time.
  • Automation: Applications of industrial and machine automation.
  • Other: Wash-down regions and online tension measurements.

Applications Of Double Ended Shear Beam Load Cells

There are numerous uses for double-ended shear beam load cells, including:

  • Heavy-duty weighing: Tanks, ships, and trucks.
  • Material management: Hopper scales, silos, and weighing bins.
  • Using batching, blending, and mixing in systems for these kinds of operations.
  • Monitoring of levels and inventories: utilized for these objectives.
  • Testing apparatus: utilized in these contexts.

Applications Of T Compression Load Cells

The force exerted along a single axis by a straight line is measured using compression load cells. They are frequently utilized in applications like:

  • Measures: Weighbridges, hopper scales, big platform scales, and truck scales.
  • Members of the structure: measuring the compressive loads at the intersection of a beam and a pile strut or between structural elements like tunnel supports.
  • Investigative studies: Calculating loads for rock thrust measurement, pile testing, and experimental research.

FAQs - Load Cell For Silo Weighing System

Q. What is a single ended Shear beam load cell?

A single-ended shear beam load cell is a load cell with one end fastened and the other end loaded. It is also referred to as a single-ended beam load cell, bending beam load cell, or cantilever load cell. The load cell is intended to bend or curve in reaction to the applied load, and it can flex under modest forces. This makes it appropriate for lower-capacity applications, such as floor scales, hopper scales, and small tank scales.

Q. What is a double ended shear beam load cell?

A double ended shear beam load cell is a beam with fixed ends on both sides and a load point in the center that monitors shear strain in response to an applied load. They rely on the strain gauge force sensing principle and are mechanically strong. Double ended shear beam load cells are widely used in industrial applications such as floor scales, conveyor weighing, and heavy-duty weighing of vehicles, vessels, and tanks.

Q. What is a compression load cell?

Compression load cells are used to measure compression forces in a range of industrial and technical applications, including: material testing, press force calibration, and measuring industrial compressive force.
Innovative Products and Service for Construction Projects and Automative Service.